Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Diagnostic accuracy of bone SPECT and SPECT/CT imaging in the diagnosis of unilateral condylar hyperplasia: A systematic review and meta-analysis.

Imaging with bone scans plays an important role in the diagnostic path of patients with unilateral condylar hyperactivity or unilateral condylar hyperplasia (UCH). The aim of this study is to perform a systematic review of the diagnostic performance of the bone SPECT and SPECT/CT scan for the diagnosis of UCH. PubMed, SCOPUS and EMBASE were searched electronically to identify diagnostic accuracy studies that assessed the diagnostic value of bone SPECT and SPECT/CT for the diagnosis of UCH, Meta-analyses were performed with Metadisc 1.4 and 2.0. A total of 14 studies, with a total number of 887 patients, were included in the qualitative analysis and 11 studies qualified for meta-analyses. The pooled sensitivity and specificity for the SPECT scan were 0.814 (95 % CI: 0.639-0.915) and 0.774 (95 % CI: 0.655-0.861), for the SPECT/CT scan these were 0.818 (95 % CI: 0.749-0.874) and 0.901 (95 % CI: 0.840-0.945). The summary receiver operating characteristics of the SPECT scan showed an area under the curve of 0.847 (95 % CI: 0.722-0.972) and that of the SPECT/CT scan was 0.928 (95 % CI: 0.876-0.980). CONCLUSION: Both bone SPECT scan and SPECT/CT scan provide a high diagnostic accuracy for UCH. The added value of the SPECT/CT scan is questionable and given the potential disadvantages of the SPECT/CT scan, including the increased radiation dose and costs, the diagnostic modality of first choice in patients with UCH should be a SPECT scan.

Investigation of the accuracy of dynamic condylar position: A model study.

OBJECTIVES: To evaluate dynamic condylar positions by integrating mandibular movement recording data and cone-beam computed tomography (CBCT) and to investigate its accuracy via dynamic model experiments. METHODS: A polyvinyl chloride skull model was utilized. A robot arm was used to operate the mandible to perform mouth opening, closing, protrusion, and lateral movements. A recording device, worn on the skull, was used to record the dynamic process and an optical position tracking (OPT) system was used to simultaneously trace the movements. A self-developed software module was used to evaluate the dynamic condylar position by integrating the dynamic tracing data and a virtual skull model derived from CBCT images. Errors were defined as differences between the dynamic coordinates of six landmarks around the condylar area derived from the software module (test) and OPT system (gold standard). RESULTS: The condylar position errors were 0.76 ± 0.31, 0.55 ± 0.15, and 0.68 ± 0.23 mm for mouth opening, bilateral, and protrusion movements, respectively. Furthermore, the errors for small, moderate, and large mouth opening movements were 0.62 ± 0.19, 0.69 ± 0.29, and 0.94 ± 0.31 mm, respectively. The errors for all movements, except for large mouth opening, were significantly less than 1 mm (P < 0.05). The error was not different from 1 mm in the large mouth opening movement (P > 0.05). CONCLUSIONS: Our developed method of achieving dynamic condylar position by integrating mandibular movement recording data and CBCT images is clinically reliable. CLINICAL SIGNIFICANCE: This study proved the reliability of evaluating dynamic condylar position using a commercial dynamic recording instrument and CBCT images.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

[Comparison of the virtual surgical planning position of maxilla and condyle with the postoperative real position in patients with mandibular protrusion].

OBJECTIVE: To compare the difference between virtual surgical planning (VSP) position and postoperative real position of maxilla and condyle, and to explore the degree of intraoperative realization of VSP after orthognathic surgery. METHODS: In this study, 36 patients with mandibular protrusion deformity from January 2022 to December 2022 were included. All the patients had been done bilateral sagittal split ramus osteotomy (SSRO) combined with Le Fort Ⅰ osteotomy under guidance of VSP. The VSP data (T0) and 1-week postoperative CT (T1) were collected, the 3D model of postoperative CT was established and segmented into upper and lower jaws in CCMF Plan software. At the same time, accor-ding to the morphology of palatal folds, the virtual design was registered with the postoperative model, and the unclear maxillary dentition in the postoperative model was replaced. Then the postoperative model was matched with VSP model by registration of upper skull anatomy that was not affected by the operation. The three-dimensional reference plane and coordinate system were established. Selecting anatomical landmarks and their connections of condyle and maxilla for the measurement, we compared the coordinate changes of marker points in three directions, and the angle changes between the line connecting the marker points and the reference plane to analyze the positional deviation and the angle deviation of the postoperative condyle and maxilla compared to VSP. RESULTS: The postoperative real position of the maxilla deviates from the VSP by nearly 1 mm in the horizontal and vertical directions, and the anteroposterior deviation was about 1.5 mm. In addition, most patients had a certain degree of counterclockwise rotation of the maxilla after surgery. Most of the bilateral condyle moved forward, outward and downward (the average distance deviation was 0.15 mm, 1.54 mm, 2.19 mm, respectively), and rotated forward, outward and upward (the average degree deviation was 4.32°, 1.02°, 0.86°, respectively) compared with the VSP. CONCLUSION: VSP can be mostly achieved by assistance of 3D printed occlusal plates, but there are certain deviations in the postoperative real position of maxilla and condyle compared with VSP, which may be related to the rotation axis of the mandible in the VSP. It is necessary to use patient personalized condylar rotation axis for VSP, and apply condylar positioning device to further improve surgical accuracy.

Age and Gender-related Morphometric Assessment and Degenerative Changes of Temporomandibular Joint in Symptomatic Subjects and Controls using Cone Beam Computed Tomography (CBCT): A Comparative Analysis.

BACKGROUND: The temporomandibular joint diseases have been associated with various predisposing factors. Joint spaces, articular eminence height and inclination, and the shapes of the condylar and glenoid fossa have all been shown to vary in temporomandibular joint diseases (TMD) patients. Advanced imaging techniques like cone beam computed tomography (CBCT) have been employed to estimate these parameters. AIMS AND OBJECTIVES: The aim of the current study was to investigate the condylar morphology, condylar and glenoid fossa shapes, and assessment of joint spaces, such as anterior, posterior, superior, lateral, and medial spaces, through CBCT slices in coronal and sagittal planes and compare them between the control group and TMD group. MATERIALS AND METHODS: A cross-sectional study was planned where 80 joints in 40 patients were assessed for the above parameters; group I consisted of healthy patients, and group II included those with temporomandibular joint diseases (TMDs). The articular eminence height and inclination were assessed on the midsagittal section. The condylar changes and shapes of the glenoid fossa and condyles, as well as the joint spaces, were assessed on the selected coronal and sagittal sections. RESULTS: The condylar fossa had a triangular shape in the TMJ group and an oval shape in the control group. The results were highly significant (P = 0.000**). A highly significant difference in morphological parameters, such as AJS, PJS, SJS, MJS, LJS, articular eminence height, and inclination, was found between the two groups (P = 0.000**). The association of morphological parameters, such as AJS, PJS, SJS, MJS, LJS, and articular eminence height and inclination were compared with condylar and glenoid fossa shapes, where the association of superior joint space and articular eminence inclination was observed. A highly significant difference was noted between the two groups with regard to all the parameters with P=0.00*. CONCLUSION: The articular eminence inclination, as well as the superior joint space, were found to be associated with the glenoid and condyle fossa shapes in the TMJ group. These observations would, therefore, help in the early diagnosis of temporomandibular joint diseases.

The effect of tooth loss on the temporomandibular joint space: A CBCT study.

OBJECTIVE: The tooth loss has a significant impact on the positioning of the condyle in the glenoid fossa and joint spaces of the temporomandibular joint (TMJ). The aim of this study was to assess the association between tooth loss and TMJ spaces using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective investigation involved the evaluation of CBCT images of the bilateral TMJs in a cohort of 111 individuals, comprising 68 males and 43 women. The dentition of the patients was categorized into three categories, including A (65.4%), B (19.1%), and C (16.4%), based on the Eichner index. Anterior, superior, and posterior joint spaces were then measured in sagittal views. The Kruskal-Wallis test and Mann-Whitney test were employed to identify significant differences among the three Eichner groups. RESULTS: The findings of the present study suggested that there was no statistically significant variation in the anterior joint space among different Eichner groups within the general population (p = .781). Nevertheless, the superior and posterior joint spaces exhibited statistically significant alterations, as indicated by p-values of .039 and .010, respectively. It was detected that condyles were positioned inferiorly and posteriorly in group C when compared to groups A and B. CONCLUSION: The present study indicated that greater loss of tooth-supporting zones is associated with posterior and inferior displacement of condyles. Understanding these relationships helps emphasize how crucial it is to replace missing teeth to enhance occlusion support and, in turn, stop the progression and further deterioration of temporomandibular disorders.

Volumetric comparison of mandibular condyles and mandibles in the different skeletal classes in the Saudi population.

Background: Assessing the relationship between the condyle and mandible volume and the various skeletal classes is essential in orthodontic diagnosis. The current study evaluated this relationship using volumetric cone-beam computed tomography (CBCT), cephalometric methods, and the correlations between them. Materials and Methods: The study examined 37 full-head CBCTs (74 condyles) from adults in the Saudi population. The condyle and mandible were separated from within the CBCT images. The volume of each segment was compared to measurements from multiple cephalometric analyses. Results: The combined total condylar volume has a moderate correlation with the maxillomandibular differential in each of the genders and in the total sample. Mandibular volume has a significant correlation with the Wits appraisal (sagittal classification) in males. It was also significantly correlated with the vertical classification using gonial angles in females and in the total sample. Conclusion: The relationship between mandible and condyle volume and cephalometric measurements is both dimensional and within the maxillomandibular complex rather than positional or related to the cranial base. Also, the correlation between the condylar and mandibular volumes and the sagittal and vertical dimensions in the orthodontic skeletal classes provides better insight into the mandibular complex.

Accuracy and stability of the condyle position after orthognathic surgery: A retrospective study.

The purpose of this study was to evaluate the accuracy and stability of condylar positioning in patients treated with bimaxillary procedures compared with patients treated with maxillary procedures alone. All patients had undergone treatment at Odense University Hospital and were treated with inferior maxillary procedures. The primary outcome was changes in condyle position and the primary predictor variable was time: pre-operative (T0) measurements to 1-week post-operative (T1) and 1-year post-operative (T2) measurements. Condyle movement was measured using dual voxel-based alignment. Sixteen patients were included. Seven patients underwent solitary maxillary procedure and 9 patients bimaxillary procedure. Bimaxillary procedures overall showed a condyle positional change in pitch from T0 to T1 and T1 to T2 compared to maxillary procedures alone. Condylar translation was stable despite large differences in positioning. Compared to solitary maxillary procedures, bimaxillary procedures showed a statistically significant anterocranial rotation at 1-week follow-up movement (3.95° vs. -0.95°; SD 3,74 vs 1,05; P value = 0.000) and an additional statistically significant anterocranial movement at 1 year after surgery (4.89° vs 0.60°; SD 3,82 vs 0,92; P value = 0.000). In conclusion a need for greater anterocranial stability of the sagittal split osteotomy than that provided by 3 bicortically fixated screws alone might be indicated.

A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study.

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

Analysis of mandibular asymmetry in adolescent and adult patients with unilateral posterior crossbite on cone-beam computed tomography.

INTRODUCTION: This study aimed to evaluate mandibular asymmetry in unilateral posterior crossbite (UPXB) patients and compare the asymmetry between adolescents and adults with UPXB. METHODS: This study included and analyzed cone-beam computed tomography scans of 125 subjects. The subjects were divided into a UPXB group and a control group according to the presence or absence of UPXB, and each group included adolescent patients (aged 10-15 years) and adult patients (aged 20-40 years). Linear, angular, and volumetric measurements were obtained to evaluate the asymmetries of the mandibles. RESULTS: Both adolescent and adult patients in the UPXB group presented asymmetries in condylar unit length, ramal height, body length, and mediolateral ramal inclination (P <0.05). Adult patients with UPXB showed greater asymmetries than adolescents. Differences with condylar unit length, condylar unit width, ramal height, condylar unit volume, and hemimandibular volume were significantly greater in adult UPXB patients than adolescent UPXB patients (P <0.05). CONCLUSIONS: The worsening of mandibular asymmetries in UPXB adults suggests that asymmetry in UPXB patients may progress over time; therefore, early treatment should be considered for UPXB adolescent patients. Further studies are still needed to evaluate the effectiveness of early treatment.

Imaging features of temporomandibular joint synovial chondromatosis with associated osseous degenerative changes.

Synovial chondromatosis (SC) of the temporomandibular joint (TMJ) is a rare benign disease associated with the formation of multiple cartilaginous nodules in the synovial tissue of the TMJ. This can result in pain, swelling, clicking, limited mouth opening, and osseous degenerative joint changes. A retrospective cross-sectional study was performed to summarize the clinical features, radiographic findings, and surgical and histopathological findings of TMJ SC patients who underwent open surgery over a 24-year period. A radiographic scoring system was used to evaluate osseous changes and correlate condyle and joint fossa degeneration. The study included 38 patients and focused on 38 joints. All 38 of these joints showed degenerative changes in the condyle, while 37 showed osseous degenerative changes in the articular fossa. The degree of condylar degenerative changes was related to the duration of the chief complaints (r = 0.342, P = 0.036) and the histopathological stage of the TMJ SC (r = 0.440, P = 0.006), while the degree of joint fossa degenerative changes was associated with the radiographic extent of the SC (r = 0.504, P = 0.001), type of calcification (r = 0.365, P = 0.024), and the histopathological stage (r = 0.458, P = 0.004).

The Role of Digital Surgical Planning and Surgical Guides in the Treatment of Unilateral Condylar Hyperplasia.

Unilateral condylar hyperplasia (UCH) results in facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Treatment consists of both surgical and orthodontic intervention. A review was performed for 4 patients with UCH who underwent digital surgical planning (DSP)-assisted condylectomy. All patients were female, aged 14 to 35 years at the time of operation with facial asymmetry and class III malocclusion. None of the patients had prior treatment and all had perioperative orthodontic appliances to provide fixation and postoperative elastic therapy. All patients underwent DSP-guided condylectomy, and intraoperative surgical cutting guides were used for 3 of the patients. All had significant improvement in facial symmetry and occlusion. None had recurrence, and additional intervention has not been required. If UCH is recognized before marked secondary changes in the maxilla, mandible, and occlusion, future orthognathic surgery may be potentially obviated. Craniomaxillofacial surgeons should consider using DSP and surgical guides in the treatment of UCH.

Effect of arthroscopic discopexy on condylar growth in adolescents with temporomandibular joint disc displacement without reduction: A retrospective self-controlled case series study.

This study was a retrospective self-controlled study that aimed to evaluate the effect of arthroscopic discopexy on condylar height and mandibular position in adolescents with temporomandibular joint (TMJ) anterior disc displacement without reduction (ADDwoR). Patients between 10 and 20 years of age and diagnosed with bilateral TMJ ADDwoR by magnetic resonance image (MRI) were included in this study. All patients underwent a period of natural course before arthroscopic surgery and then a follow-up period postoperatively. Changes in condylar height and mandibular position were measured by MRI and X-ray radiographs. Data were analyzed by paired t-test, Pearson correlation analysis, and generalized estimating equations. This study comprised a total of 40 patients with a mean age of 14.80 years. Pearson correlation analysis showed correlations between condylar height and mandibular position changes. The condylar height change during the post-operative period was significantly higher than that during natural course period (3.57 mm, p < 0.001). The changes in mandibular position (including ANB angle, SNB angle, and Pog-Np) were significant different (all p < 0.05) between the two periods. This study found that arthroscopic discopexy can promote condylar growth and correct dentofacial deformity in adolescents with bilateral TMJ ADDwoR.

Quantification of temporomandibular joint space in patients with juvenile idiopathic arthritis assessed by cone beam computerized tomography.

OBJECTIVE: To describe a method to calculate the total intra-articular volume (inter-osseous space) of the temporomandibular joint (TMJ) determined by cone-beam computed tomography (CBCT). This could be used as a marker of tissue proliferation and different degrees of soft tissue hyperplasia in juvenile idiopathic arthritis (JIA) patients. MATERIALS AND METHODS: Axial single-slice CBCT images of cross-sections of the TMJs of 11 JIA patients and 11 controls were employed. From the top of the glenoid fossa, in the caudal direction, an average of 26 slices were defined in each joint (N = 44). The interosseous space was manually delimited from each slice by using dedicated software that includes a graphic interface. TMJ volumes were calculated by adding the areas measured in each slice. Two volumes were defined: Ve-i and Vi , where Ve-i is the inter-osseous space, volume defined by the borders of the fossa and Vi is the internal volume defined by the condyle. An intra-articular volume filling index (IF) was defined as Ve-i /Vi , which represents the filling of the space. RESULTS: The measured space of the intra-articular volume, corresponding to the intra-articular soft tissue and synovial fluid, was more than twice as large in the JIA group as in the control group. CONCLUSION: The presented method, based on CBCT, is feasible for assessing inter-osseus joint volume of the TMJ and delimits a threshold of intra-articular changes related to intra-articular soft tissue proliferation, based on differences in volumes. Intra-articular soft tissue is found to be enlarged in JIA patients.

Effect of occlusal stabilisation splint with or without arthroscopic disc repositioning on condylar bone remodelling in adolescent patients.

The aim of this study was to investigate the treatment effects of a stabilisation splint (SS) with and without arthroscopic disc repositioning (ADR) on condylar bone remodelling in adolescent patients with anterior disc displacement without reduction (ADDwoR). Cone beam computed tomography and magnetic resonance imaging were used to analyse condylar bone remodelling, condyle position, and disc position. Twenty-two temporomandibular joints of 14 patients who underwent ADR (age range 12-20 years; mean follow-up 12.5 ± 7.8 months) and 21 temporomandibular joints of 14 patients who did not undergo ADR (age range 13-20 years; mean follow-up 11.1 ± 5.1 months) were included. The change in bone volume (P < 0.001), rate of bone volume change (P < 0.001), and change in condyle height (P = 0.031) were significantly greater in patients with ADR than in those without ADR. The changes in posterior joint space (P = 0.013), superior joint space (P = 0.020), and ratio of condyle sagittal position (P = 0.013) were significantly greater in patients with ADR than in those without ADR. All discs in patients who underwent ADR and one disc in those who did not undergo ADR were backward repositioned. In conclusion, in adolescent patients with ADDwoR, ADR with SS therapy achieved better condyle and disc position than SS therapy alone, and also induced bone generation.

Developing a universal and reliable temporomandibular joint reference system for quantifying morphological and positional changes.

OBJECTIVES: This study aimed to provide a universal and reliable reference system quantifying temporomandibular joint (TMJ) morphological and positional changes. METHODS: Large field-of-view (FOV) cone-beam computed tomography (CBCT) images (20 TMJs) from 10 preorthognathic surgery patients and limited FOV CBCT images (40 TMJs) from 20 splint therapy-treated patients with temporomandibular disorders were collected. TMJ-specific reference system including a TMJ horizontal reference plane (TMJHP) and a local coordinate system (TMJCS) was constructed with landmarks on cranial base. Its application for TMJ measurements and its spatial relationship to common Frankfort horizontal plane (FHP) and maxillofacial coordinate system (MFCS) were evaluated. RESULTS: Five relevant landmarks were selected to optimally construct TMJ-specific reference system. General parallelism between TMJHP and FHP was demonstrated by minimal angular and constant distance deviation (1.714 ±â€…0.811º; 2.925 ±â€…0.817 mm). Additionally, tiny axial orientational deviations (0.181 ±â€…6.805º) suggested TMJCS rivaled MFCS. Moreover, small deviations in orientations and distances (1.232 ±â€…0.609º; 0.310 ±â€…0.202 mm) indicated considerable reliability for TMJCS construction, with intraclass correlation coefficients (ICCs) ranging from 0.999 to 1.000. Lastly, slight discrepancies in translations and rotations revealed high reliability for condylar positional and morphological measurements (ICC, 0.918-0.999). LIMITATIONS: TMJ-specific reference system was merely tested in two representative FOVs. CONCLUSIONS: This study provides a universal and reliable reference system for TMJ assessment that is applicable to both limited and large FOV CBCT. It would improve comparability among diverse studies and enable comprehensive evaluations of TMJ positional and morphological changes during TMJ-related treatment follow-up such as splint therapy and disease progression.

How good is good enough? Lessons learned from review of outcomes of 50 patients following extraoral open reduction and internal fixation of condylar neck and base fractures at a regional major trauma centre.

The management of mandibular fractures is routine owing to their frequency, particularly those of the mandibular condyle, which are invariably common. Notwithstanding disparities in the literature, the international consensus towards which fractures of the mandibular condyle benefit from open surgical intervention is almost universally accepted. Closed reduction or non-operative management may be utilised in certain circumstances. Whilst outcome research has addressed complications with respect to operative side effects, outcomes related to the quality of bone repair and the setting in which this is delivered have not been universally addressed. The aim of this study was to determine the predictability of translating an indicated operative treatment plan into an acceptable functional result. We evaluated the outcomes of 59 extracapsular condylar fractures in 50 patients who were treated by extraoral open reduction and internal fixation (ORIF) between March 2021 and August 2022. We reviewed demographic data, surgical approach, and plating strategy, and critically evaluated the clinical and radiological outcomes. Whilst we found that the quality of reduction was not universally perfect, the majority were within tolerance, which we set according to the Strasbourg Osteosynthesis Research Group (SORG) definition for minimal displacement (<2 mm overlap and 10° angulation). The cohort had good functional occlusion and minimal long-term postoperative complications. Two patients required re-operation for non-union, and we discuss causality in these cases. In conclusion, we found that ORIF of condylar neck and base fractures is predictable in real-time surgical practice with respect to functional outcome. However, if imperfectly reduced, there is a small risk of non-union.

Surgical treatment of paediatric fractures of the mandibular condyle: a systematic review of the literature.

This study aims to review surgical treatment in paediatric condylar fractures and describe different types of techniques performed, along with the results obtained from them. A retrospective review was conducted from records of paediatric patients (from one to 17 years old) who sustained fractures of the mandibular condyle and underwent surgical treatment from 2003 to 2023. The number of patients, age, location, and type of fracture, clinical and imaging examinations, treatment methods, intraoperative/postoperative complications, removal of osteosynthesis material, follow up and outcomes were recorded and analysed. A total of 68 patients with 79 fractures were identified. The most common fracture pattern was condylar neck fracture (61.1%). Of the 68 patients who underwent surgical treatment, one had a complication of minimal temporal paraesthesia and another patient had near-complete resorption of the condyle. A total of 55 patients (81%) reported normal dental occlusion, mouth opening (>35 mm), lateral excursions (7-8 mm), TMJ function, no pain, no deviation of the midline or the jaw, and no ankylosis. Thirteen patients (19%) developed an unsatisfactory result, nine patients (13%) had a jaw deviation on mouth opening, four patients (6%) had mandibular retrusion, and seven patients (10%) had signs of TMJ dysfunction. A total of 59 patients (87%) reported bone completely healed with no signs of bone abnormality; seven patients (10%) had shortening of the condylar neck and/or ramus. Surgical treatment can lead to good or excellent results for severely dislocated and displaced condylar fractures in children and can reduce the unsatisfactory results resulting from closed treatment.